Since 1994
+86 28 8393 0607
Since 1994
+86 28 8393 0607
Dec. 08, 2017
Forging induction heating
Induction hot forging and forming is a process to heat metal material to 1000—1250 C degree in general. Induction forging furnace widely used in metal and foundry sector. The forging heating material are aluminum, carbon steel, brass ,copper, different material heat to different temperature.
DUOLIN induction forging separated into two types: Full forging and Partial forging.
Full forging is carried out in the induction furnace. Continuous feed relies on feeding system which pushes the billets through the heating tunnel coils. After hot forging, using localized compressive forces to shaping the billets.
Partial forging is heating the end of a bar to allow the material to be upset into a head, i.e. a bolt. The cold raw material can be heated one piece at a time or on a continuous feed basis.
Advantage:
1:max carbon steel production is 3 T/hour
2:diameter above 140mm or length above 400 mm workpiece need to make special heating furnace
3:heat uniform, tempreture moniter,
4:heat rapidly, less oxide layer
Previous: Induction heating for pump hardening
Latest News
The 4th Changsha International Construction Equipment Exhibition (CICEE)
May. 28, 2025
The 4th Changsha International Construction Equipment Exhibition (CICEE) has been held from May 15-18, 2025. Duolin, as a well-known induction heating equipment manufacturer in China, was invited to participate in this exhibition.
The Pros and Cons of Induction Hardening
May. 08, 2025
Induction hardening is a heat treatment method used to selectively and rapidly harden the surface of a metal. In this process, a copper coil carrying an alternating current is positioned near—without touching—the metal part.
Case Presentation
Customized Turnkey induction heating machine
Provide solution according to your requirement, well match with your production line
Related Products
100-300KW High Frequency Induction Heating Equipment
Power 30-300KW
Work Frequency 50-250Khz
This small power induction heater are high performance on small parts metal induction heating, easy to move and operate. Designed, produce and develpoment by Duolin team for 30 years, durable and good heating performance.
Induction heating is the process of heating an electrically conducting object (usually a metal) by electromagnetic induction, through heat generated in the object by eddy currents. An induction heater consists of induction power supply (induction heater) and inductor (coil) that is a shaped to contour the part, and a work station where the part is held and presented to the coil.
Quick Links
Tel.: +86 28 8393 0607
Mob.: +86 158 8242 2821
WhatsApp: +86 158 8242 2821
Add.: 112th Hancheng Road Xindu Industrial Zone Chengdu China
